« Engineers Without Borders: Solar Cooker Challenge
GreenJoyment | Solar Cooking and Solar Cookers
Spanish Omlette on a Nifty Solar Cooker »

Pressure Cooker Gets Overcooked in Solar Cooker

Posted by Jonathan

Pressure cooking is a method of cooking in a sealed vessel that does not permit air or liquids to escape below a preset pressure. Because the boiling point of water increases as the pressure increases, the pressure built up inside the cooker allows the liquid in the pot to rise to a higher temperature before boiling.

Pressure cookers are generally made from aluminum or stainless steel. The former may be stamped and buffed or anodized, but this metal is unsuitable for the dishwasher. Expensive stainless steel pressure cookers are made with heavy, three-ply, or copper-clad bottom (heat spreader) for uniform heating, since stainless steel has lower thermal conductivity. Most modern units are dishwasher safe, although some manufacturers may recommend washing by hand.

A gasket or sealing ring forms an gas-tight seal which does not allow air or steam to escape between the pot and the lid; normally, the only way the steam can escape is through a regulator on the lid when the pressure has built up. In case the regulator is blocked, a safety valve is provided as a backup escape route for steam. The simplest safety valve is a loose-fitting rubber plug in the lid, held in place by steam pressure. If the pressure exceeds design limits, the plug pops out of its seat.

To seal the gasket, some pressure cookers have a lid lock with flanges, similar to a bayonet-style lens mount, that works by placing the lid on the pot and twisting it about 30° to lock it in place. Contemporary designs of this style of cooker also have a pressure-activated interlock mechanism that prevents the lid from being removed while the cooker is pressurized.[1]

Other cookers, particularly the larger types used for home canning, have oval, oversized lids.[2] With these, since the lid is larger than the opening in the top of the pressure cooker, one inserts the lid at an angle, then turns the lid to align it with pot opening. A spring arrangement straddles the top of the cooker and holds the lid in place. When cooking, the pressurized steam inside keeps the lid tightly in place, preventing accidental removal.

Pressure cookers are usually heavy, because they need to be strong. However, some pressure cookers are manufactured for camping, and can be as light as 1.2 kg for a four-litre pot.